TOSHIBA TECRA A10-1K2 Laptop Keyboard, TECRA A10-1K2 keyboards
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1K2
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1K2
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1K2
![]() Click for more pictures |
||
|
||
TOSHIBA TECRA A10-1K2 keyboards tags: Satellite A60 , Satellite A2 , Satellite 1135 laptop keyboard , Satellite A120 , Satellite M1 , TOSHIBA Satellite 2100. laptop keyboard , TOSHIBA Satellite 1300 , Satellite Tecra A1 , Tecra M10-ST9 laptop keyboard , Satellite A4 , Satellite A35 , Satellite A120 laptop keyboard , Satellite A35 , TOSHIBA Satellite A3 laptop keyboard , Satellite M3 laptop keyboard , Satellite A5 , TOSHIBA Satellite M2 laptop keyboard , Satellite A115 laptop keyboard , Satellite 2100. , Satellite M2 laptop keyboard , Equium M70 , Satellite A35 , Tecra M9-S551 laptop keyboard , Satellite 1130 , Satellite P35 , Satellite A3 , TOSHIBA Equium M70 , Satellite A1135 laptop keyboard
Our keyboards are original from the keyboard manufacturer, We provide 100% genuine and brand new keyboard to replace your TOSHIBA TECRA A10-1K2 keyboard. We back each purchase with a 100% Satisfaction Guarantee, so buy with confidence.
Your attention please:
Please firstly compare the picture with your TOSHIBA TECRA A10-1K2 keyboard before you place an order, especially the ribbon cable (position, length and width). Make sure that the model of laptop and part number of TECRA A10-1K2 keyboard is the right one you need as well as the layout version. If you are still not sure after a comparation, or want to know more about the TOSHIBA TECRA A10-1K2 laptop keyboard, please contact us.
TOSHIBA TECRA A10-1K2 notebook keyboard installation notice:
- To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the laptop computer.
- The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Exercise care when removing and handling the TECRA A10-1K2 keyboard.
- Before securing the latch on the system board connector, ensure that the TOSHIBA TECRA A10-1K2 laptop keyboard connector is seated and the tabs on the connector are properly aligned with the slots on the system board connector. Failure to align the tabs could result in a malfunction of the laptop or damage to the cable and/or the cable connector.






















